Fxpansion Bfd3 Kit 6 Kontakt By Derwanderer
Download the FXpansion BFD3 Kit 3 KONTAKT by DerWanderer [oddsox] Torrent or choose other FXpansion BFD3 Kit 3 KONTAKT by DerWanderer [oddsox] torrent downloads.
Kit 3 follows the same structure as Kits 1 & 4. As for Kit 2, each sample provided by fxpansion consists of 16 channels. Which means for the Mic I called Room Far, we have both stereo (2 channels) and mono (5 channels). When converting this Kit, I had 4 options, 3 of them would not require any script changes: Option 1: Provide only the mono channels for Room Far Option 2: Provide only the stereo channels for Room Far Option 3: Mix the stereo channel with the 5 mono channels (i.e convert the 5 mono channels into stereo and mix them with the stereo samples).
Option 4: Change the script and provide an extra mic (I called it Amb Mono) and use the stereo channels for the Room Far and the mono ones for the new mic. To provide the best results, one would choose Option 4 and that's what I did. So I modified both my program used for converting the BFD3 samples into multi files and the Kontakt script to support a fifth Mic.
I have also added one small feature which I hope would help those who like to route Mics to different output channels. As you can see from my screenshot, there is now a drop down at the bottom of each Mic. By default it is Master. This will allow you to route each Mic to different output channels. One very important note to those who already changed the routing for each Mic using the instrument edit and Bus Output. If you already created a project in your DAW and used multi routing for any of the instruments in previous kits: After you overwrite your old NKR file with the new one, the first time you open this project, you need to set the output of each Mic from the interface to the one you chose previously. You only need to do this once; after that, your choice will be saved.
Same thing if you used Kontakt as a stand-alone and saved the instrument after you changed the routing of one or more buses. As an extra content, fxpansion provided 6 instruments under Percussion Pieces. These are actually the same 6 instruments that were provided in the BFD Percussion Expansion Pack. These 6 instruments have also been converted and posted here. For me, one of the most frustrating thing about all BFD versions is that for any instrument outside a drum kit, you will have to go to the details of the instrument or sometimes (like the Taiko expansion kit) you have to go to the manual to see what hit each one presents.
BFD just lists them using the general terms they use (like Alt, Drag, Flam, etc.). So what I did here is that I got the name of the hits from their instrument file and put the real name of the hit so that you can see the description of each type of hit. As an example if you look at the above screenshot, you will see the actual name of the 5 different hits of the Carroll Sound Tambourine: Center Hit, Thumb Roll, Single Shake, Edge with Fingers, Muted Hit.
In BFD3 (and previous versions as well), you will see them as: Hit, Drag, Flam, Rim, SS. Fun Fact: in the BFD Expansion Pack, the manufacturer of the Cabasa was LP. Here it is Carroll Sound. And the samples are the same. I know that because I have already converted the BFD Percussion and they are exactly the same samples. As mentioned in my previous posts, if you don't want these kits but you want to use the new multi-routing feature for the other kits in my previous posts, just download the NKR file and overwrite your old one.
Best Service Ethno World 6 Kontakt Torrent
All in all, the 7 kits + Percussion pieces in Kontakt amount to 31.7 GB as opposed to (I think) 55 GB in BFD3.
I think it is better to start posting more than 1 kit per week or else it will drag for 7 weeks. I am sure by then, most of you would be tired of these kits. Kits 6 & 7 compliment Kit 5.
The same instruments used in Kit 5 are used in these 2 kits but with different beaters. Whereas Kit 5's beater was a stick, Kit 6 uses a brush as a beater and Kit 7 uses a mallet.
The same internal channel structure as Kit 5 is used for Kits 6 & 7 (i.e Room Far mic is stereo) As for Kit 4, the internal channel structure follows Kit 1 (i.e Room Far mic is mono). I have also added 2 new small features: As per the screenshot above, for each articulation you can now adjust 2 things: The volume and the velocity sensitivity. The volume is self explanatory. The velocity sensitivity is Kontakt's internal modulation intensity of the velocity. So, set at 100%, it will behave exactly like the previous 2 kits: Kontakt will decrease the volume of the samples for low velocities. Set at 0%, the volume will rely completely on the volume of the sample as recorded in the BFD3 Factory Content. I think by introducing this, it will give you more control of the articulations.
I just want to share few things as I have been asked about them: 1) The kits are independent. You can download individual kits or all Kits. It is up to you. 2) You do NOT need to have BFD3 or its factory content installed. All you need is Kontakt 5.3.0 (not Kontakt Player). 3) To copy these kits, follow the same instructions in my previous post (Kit 5) 4) If you do not want to download these kits, but you want to get the 2 extra features I added, just download the nkr file (I have also provided it separately in its own link). 5) If you already downloaded one or both of the previous kits and you're happy with them and you don't want these extra features, you don't need to do anything.
Finally, one important thing. With the addition of these 2 extra features and also more changes (invisible for now) to support Kit 2 (which will be posted next week), I didn't have enough time to test completely the script. So if you have any issues with the script let me know and I will fix as soon as I have a free time.
I will explain the changes made for Kit 2 next week. As always, I hope you enjoy these kits. The Wanderer.